As we all know ,Galletto 1260 ECU Flash Cable with strong function .Galletto 1260 EOBD2 Flasher access to read and write flash/eprom dumps of the most recent ECUs. Obd2repair share you how to use Galletto 1260 ECU Flash Cable to read/write BMW MS43/MS42 following.
The white 2 pin connector has "L" and "K" pin identifiers and the black 2 pin connector, "+" and "-" which should be power and ground
How to use the Galletto v1260 ECU flasher to read/write full flash from MS43/MS42?
1. First, you need to remove ECU from car.
2. Turn off 4 torx bolts from case and extract mainboad.
3. Locate 104 boot pin
4.Short boot pin to GND
5.Put "+12V" and "-" to your black (2 pins) socket connected to galletto 1260 cable
6.Connect K-line from white (2pins) socket to ECU.
7.Connect power to ECU
Note: If you use the K-line pin.
1) L-line no need
2) 12V and GND is direct power source to black (2pin) and to ECU (4/7 and 26)
After 6 Seconds (from power connected) remove wire between 104pin and GND. That's all. ECU now in bootmode and you can "connect".
Test result:
Successfully read and write MS42/MS43 full flash in bootmode with gallet 1260 flasher and JMGerageFlasher software.
Galletto 1260 EOBD2 Flasher Galletto 1260 ECU Flashing Cable
The white 2 pin connector has "L" and "K" pin identifiers and the black 2 pin connector, "+" and "-" which should be power and ground
How to use the Galletto v1260 ECU flasher to read/write full flash from MS43/MS42?
1. First, you need to remove ECU from car.
2. Turn off 4 torx bolts from case and extract mainboad.
3. Locate 104 boot pin
4.Short boot pin to GND
5.Put "+12V" and "-" to your black (2 pins) socket connected to galletto 1260 cable
6.Connect K-line from white (2pins) socket to ECU.
7.Connect power to ECU
Note: If you use the K-line pin.
1) L-line no need
2) 12V and GND is direct power source to black (2pin) and to ECU (4/7 and 26)
After 6 Seconds (from power connected) remove wire between 104pin and GND. That's all. ECU now in bootmode and you can "connect".
Test result:
Successfully read and write MS42/MS43 full flash in bootmode with gallet 1260 flasher and JMGerageFlasher software.
This article is compiled by www OBD2repair com, if you have any advice on it, pls feel free to contact OBD2repair - China OBD2 repair Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
ADD:1102A,DongMing Business Bldg, Longhua new district, Shenzhen 518113,China
Whatsapp (+86)13714697738
Email: info@obd2repair.com
Skype: eobdscan1
Website: www.obd2repair.com
