Galletto 1260 is obd2 repair OBDII EOBD ECU Flashing Cable.Galletto 1260 OBD2 ECU Flashing Cable work on EDC16, EDC15, MEx.x , DELCO and many more engine4s ecu.Obd2repair share you the detail steps about remap golf mk4 1.9 pd ecu with Galletto 1260.
Galletto 1260 EOBD2 Flasher Galletto 1260 ECU Flashing Cable
Requirement:
-Galltto 1260 and software
-A clean Win XP laptop
Remap golf mk4 1.9 pd ecu with Galletto 1260 step by step
1. Turn ignition to ON and press “ECU data” button on the button of the software program The Galletto software will display vehicle ECU part number
2. Click “Read ECU”, save the file with the extension .bin, like: original file. bin The system will start to read ECU. If fail to read seedkey error, remove fuse 11 and 15 which will turn off the dash. Turn off the dashboard after read ECU.
3. Click “Open file” Select the file. The file extension is .mod. It is the correct form of Galletto 1260. It will be sent to your email from your dealer. Click “OK” to continue Turn ignition ON Don’t close or open the door, make sure the computer is stable Select “Download file”
4. Then Galletto software will prompt to turn off the dash for 5 seconds Turn on the ignition again NOTE: If you are not sure which file should be downloaded for your vehicle, please contact diyobd2.fr technician.
